Rubber Stamp Storage

As most of you stampers know, storing stamps takes alot of space something most of us have very little of. This storage solution came from many sources and forums etc. Jennifer McGuire gave me the idea for the holders. She has since just changed her system. But that is what Crafty Storage is about, using methods that work for you and if they don't change to one that does. I just took and modified it to work for me.

This is not a project that can be done in a day. This did take me a few weeks and I prepared myself for that. Since I kept my stamps by type the first sort was easy.Sentiments, objects, birthdays etc. I then stamped each image on a 8 1/2 x 11 inch piece of cardstock. I then began to unmount my wood stamps by category. I put the stamps in the microwave for about 30 seconds. I then would remove the rubber from the wood and set aside.(There a numerous sites that can give you specific directions, just use a search engine and type unmounting wood stamps)

When I was done with the unmounting I used Alene's Tack over and over glue and put on the back of my unmounted stamps with a foam brush. I let them dry overnight then I used acrlyic sheets as a backing for the stamp. Then I used the Loose Leaf binder sheets from Office Depot to slide the sheets into. See below.



I then labeled each holder Objects 1, Objects 2, Sentiments 2, Sentiments 3, etc. This allows my system to grow because each new binder holder becomes the newest number and gets added the inventory notebook.

I then placed my stamped sheets into a notebook and used dividers to section them. I placed the stamped sheets in a sheet protector. I then used post its on the stamped images and then I counted how many object 1's I had and printed everything on the round labels that were made for the printer. I used a fun font. I then placed the round sticker on each image.






To keep my stamps sorted and organized I covered manilla file folders with decorative paper. I ran the tags thru my computer and then used my Nestabilities for the labels.

So when I get ready to stamp I pull out my Inventory Notebook and go to the category I need and I look at my choices and then I see the stamp is in Objects 2 then I pull the Objects 2 out and grab my stamp.

No more digging thru stamps. Easy peasy! Again remember that it was a long process but the results are so worth it. Please feel free to visit my blog